IEICE Transactions on Communications · 2009 · 20 citations · 4 references
EngineeringElectrical EngineeringAnalog ElectronicsDigital StrategyPower ElectronicsDc-dc ConversionDc-dc ConvertersFrequency ControlFrequency RegulationConverter ControlDc-dc Converter ControlDigital Control Of Dc-dc ConvertersDigital Control Of Power ConvertersGainLoadPid Control DesignPower Converter Design
This paper presents the regulation and dynamic characteristics of the dc-dc converter with digital PID control, the minimum phase FIR filter or the IIR filter, and then the design criterion to improve the dynamic characteristics is discussed. As a result, it is clarified that the DC-DC converter using the IIR filter method has superior performance characteristics. The regulation range is within 1.3%, the undershoot against the step change of the load is less than 2% and the transient time is less than 0.4ms with the IIR filter method. In this case, the switching frequency is 100kHz and the step change of the load R is from 50 Ω to 10 Ω. Further, the superior characteristics are obtained when the first gain, the second gain and the second cut-off frequency are relatively large, and the first cut-off frequency and the passing frequency are relatively low. Moreover, it is important that the gain strongly decreases at the second cut-off frequency because the upper band pass frequency range must be always less than half of the sampling frequency based on the sampling theory.
4
Output characteristics of DC-DC converter with DSP control
Fujio Kurokawa, Tomohiko Sato, Hirofumi Matsuo et al. · 2003 · 26 citations