Biotechnology and Bioengineering · 1998 · 51 citations · 26 references
EngineeringChemical EngineeringEnvironmental EngineeringBioreactor DesignReaction EngineeringWastewater TreatmentAir Pollution BiotreatmentBiological Treatment ProcessesWaste TreatmentWastewater BiotreatmentAerobic TreatmentBiofilter TechnologyCarbon Source UtilizationDenitrificationDenitrification ProcessesDenitrifying BacteriaNitric OxideRemoval Efficiency
The presence of significant denitrification activity in an aerobic toluene-treating biofilter was demonstrated under batch and flow-through conditions. N2O concentrations of 9.2 ppmv were produced by denitrifying bacteria in the presence of 15% acetylene, in a flow-through system with a bulk gas phase O2 concentration of >17%. The carbon source for denitrification was not toluene but a byproduct or metabolite of toluene catabolism. Denitrification conditions were successfully used for the reduction of 60 ppmv nitric oxide to 15 ppmv at a flow rate of 3 L min-1 (EBRT of 3 min) in a fully aerated, 17% v/v O2 (superficially aerobic) biofilter. Higher NO removal efficiency (97%) was obtained by increasing the toluene supply to the biofilter.
26
Francis L. Smith, George A. Sorial, Makram T. Suidan et al. · Environmental Science & Technology · 1996 · 163 citations
Engineering, Environmental Engineering, Air Pollution Control +13
Microbial production and uptake of nitric oxide in soil
A. Remde, F. Šlemr, Ralf Conrad · FEMS Microbiology Letters · 1989 · 135 citations