Journal of Composite Materials · 2008 · 16 citations · 14 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsNanomaterialsPolymer EngineeringComposite MaterialsNanocompositesPolymer CharacterizationPolymer CompositesPolymer NanocompositesPolymeric NanomaterialsClay ContentClay NanocompositesClaysDynamic Mechanical PropertiesIn Situ PolymerizationMechanical Properties Of NanocompositesStorage ModulusTensile Strength
Dynamic mechanical properties of polyester—montmorillonite nanocomposite thick films, prepared by the in situ intercalative polymerization method, were evaluated in a tensile mode. A fast fabrication procedure was chosen to allow industrial applications. A total time less than 1 h was sufficient to obtain a thick film which could be cut for the specimen preparation. The final films had a thickness of 250 μm and a nano-clay content ranging from 0 to 10 wt%. A differential scanning calorimeter was used to investigate the effect of the clay content on the resin polymerization kinetics whereas tensile tests were performed to make a comparison with dynamic mechanical results. The maximum in the mechanical performances was obtained at the clay content of 1 wt% at which an increase of about 55% for the storage modulus was measured in comparison with the unfilled resin.
14
Polymer Layered Silicate Nanocomposites
Emmanuel P. Giannelis · Advanced Materials · 1996 · 3.5K citations
Natural Sciences, Materials Engineering, Materials Science +17
Clay-Reinforced Epoxy Nanocomposites
Tie Lan, Thomas J. Pinnavaia · Chemistry of Materials · 1994 · 1.1K citations
Natural Sciences, Materials Engineering, Materials Science +11