Transactions of the ASAE · 1997 · 14 citations · 0 references
Natural SciencesMaterials ScienceBuilding MaterialsMechanical Behavior Of MaterialsStructural MaterialsDamage ToleranceWoodworking TechnologyFailure Mode AssessmentFailure Mode ClassificationFailure Mode Investigation
Ring-shank nails are used extensively in post-frame construction due to their superior performance, yetsurprisingly little testing has been done on nail sizes above 12d. Experience in the post-frame industry suggests thatpublished allowable design values for ring-shank nails may be overly conservative and need revision. The goal of theresearch reported herein was to characterize the withdrawal strength of ring-shank nails embedded in Southern Pinelumber. Three sizes of galvanized and ungalvanized (bright) ring-shank nails from two manufacturers were studied. Ringshanknails had approximately twice the withdrawal resistance of smooth-shank nails of the same diameter. Galvanizingslightly reduced withdrawal strength (approximately 8%) due to partial filling of the threads. Nail head pull-through wasstudied as a possible failure mode. Even allowing for galvanizing and head pull-through, strong evidence is presented forincreasing withdrawal design values for ring-shank nails.