Improving the Woven Glass/Epoxy Composite for Automobile Exterior Body Cover

Mohsen Poorzeinolabedin, Mohammad Golzar

Materials and Manufacturing Processes · 2011 · 14 citations · 3 references

Concepts

Abstract

Abstract Improving the specific strength and specific stiffness of automobile body cover is discussed by using plain woven E-glass fabric/epoxy. The mechanical characteristics of composites were determined by tensile and flexural tests in 0°and 45°layup angles. The stacking of laminas was verified, and the stiffness matrixes [Q], ABD, and the effective modulus of each laminates were calculated. Based on selected desirability factors, the 0°layup angle was found proper for the improved body cover. The prototype composite body covers manufactured using hand layup show an increase of 1.8 and 3.4 in specific strength and specific stiffness compared to steel. Keywords: Automobile body coverComposite manufacturingPlain woven E-glass fabricStacking sequence ACKNOWLEDGMENT The authors would like to thank Iran Khodro Research Center, especially Simdar and Mirzazadeh Jalil for their continued support of this project; also Jabbari Poor Behzad and Vazifeh Asl Yaghoob for performing some of the experiments, and Ahmadi Gholamhasan who helped us in fabricating the composite mold part.

References

3