Journal of Cellular Plastics · 2014 · 26 citations · 17 references
Natural SciencesMaterials EngineeringMaterials SciencePhase TransformationsPolymer ChemistryPolymer MaterialsPolymer CrystallinityPolymer FoamsPolymer Phase BehaviorPolymer ProcessingCell MorphologyCell Morphology AnalysisFoamingFoaming BehaviorFoaming ProcessesMeltingPolypropyleneX-ray Diffraction Analysis
The expanded polypropylene beads with microcellular structure were prepared by an autoclave-based batch foaming process using non-supercritical CO 2 as the foaming agent. Herein, smaller polypropylene micropellets (∼0.6 mm) were obtained from three kinds of polypropylene resin by underwater micro-pelletizer system. The results from differential scanning calorimetry indicated that the double melting peaks of beads moved to higher temperature with increasing saturation temperature and pressure. The kind of comonomer did not exert noticeable influence on the double melting behaviors. The X-ray diffraction of expanded polypropylene bead revealed that characteristic peaks of α-type crystal did not change compared with that of original polypropylene micropellets. The relationship between cell morphology and saturation temperature/pressure of expanded polypropylene beads are discussed preliminarily by scanning electron microscope.
17
Foaming of polypropylene with supercritical carbon dioxide
Zhimei Xu, Xiulei Jiang, Tao Liu et al. · The Journal of Supercritical Fluids · 2006 · 295 citations
Natural Sciences, Materials Engineering, Materials Science +12
Strategies for achieving ultra low‐density polypropylene foams
Hani E. Naguib, Chul B. Park, U. Panzer et al. · Polymer Engineering and Science · 2002 · 269 citations
Radical reactions on polypropylene in the solid state
Manfred Rätzsch, M. Arnold, Eberhard Borsig et al. · Progress in Polymer Science · 2002 · 229 citations