Behaviour of Z phase in 9–12%Cr steels

Abstract

The literature on the behaviour of modified Z phase Cr(V,Nb)N in creep resistant martensitic 9–12%Cr steels is briefly reviewed. Ten different 9–12%Cr steels were investigated after prolonged exposure at 600–660°C; the modified Z phase was found in all of them. In steels with high Cr content (11–12%), Z phase precipitates much faster than in 9%Cr steels. Precipitation of Z phase is associated with dissolution of MX carbonitrides, and causes a breakdown in long term creep strength in 9–12%Cr steels. High Cr steels show creep instabilities accompanied with Z phase precipitation, whereas low Cr steels show good long term creep stability. A niobium free CrVN variant of the modified Z phase was observed for the first time during the course of this work. The solution temperature of the Cr(V,Nb)N and CrVN modified Z phases was found to be close to 800°C for 11–12%Cr steels, much lower than the 1200–1250°C solution temperature of the unmodified CrNbN Z phase. Above the solution temperature the modified Z phase is replaced by MX particles.