Mechanical and Structural Characteristics of Electrodeposited Ni–Fe–W Alloy after Heat-Treatment

Seongjae Mun, Minsoo Kim, Tae-Hong Yim, Jaeho Lee, Tak Kang

Journal of The Electrochemical Society · 2010 · 22 citations · 23 references

Concepts

Abstract

Ni–Fe–W alloys were obtained by electroplating using an ammoniacal citrate bath with a cation exchange membrane cell. The addition of 8 atom % iron to the Ni–W alloy removed surface microcracks on the deposits and increased the iron content, which was paralleled by an apparent increase in the tungsten content. To improve the microhardness, deposits were heat-treated at various temperatures. The maximum Vickers hardness value of 1350 was obtained after heat-treatment at . X-ray diffraction analysis revealed that the increasing annealing temperature induced both grain growth and precipitation of new phases, especially . Transmission electron microscopy and selected area diffraction observations revealed that annealing at led to a significant hardening of the deposits due to the precipitation of new phases with nanosized grains. However, as the annealing temperature was increased above , the microhardness began to fall with increasing grain size.

References

23