British Journal of Applied Physics · 1962 · 22 citations · 9 references
EngineeringMaterials EngineeringMaterials ScienceMaterials ProcessingMetallurgyTribologyAbrasion ResistanceAbrasive WearMetalsSoft MaterialsWear ResistanceWear-resistant MaterialsAbrasive Wear BehaviorFrictionFriction TestingLubricated ContactMechanical AbrasionMetal-metal ContactsViscosityWear Rate Measurement
The friction μ and wear rate M of the soft metals tin, lead and zinc are determined on dry emery papers at approximately 1 kg load and a few centimetres per second sliding speed. The (M, μ) relation over the coarser grades of emery is practically linear, as for harder metals, but on the finer grades, having particle diameter below about 20 μm, the locus curves to lower μ. This indicates a smaller proportion of the load is carried on emery-emery contacts and more is on metal-metal contacts. Under lubricated conditions, when a low-viscosity liquid is used as on emery wet with propyl alcohol, a similar relation is found, but one which corresponds to much less pick-up of abrasive by the metal.
9
A theory of friction and wear during the abrasion of metals
J. Goddard, H. Wilman · Wear · 1962 · 324 citations
Natural Sciences, Materials Engineering, Materials Science +10
Theory and Practice of Electron Diffraction
Students Quarterly Journal · 1939 · 147 citations
A Theory of the Abrasion of Solids Such as Metals
J. Goddard, H. Harker, H. Wilman · Nature · 1959 · 44 citations
Natural Sciences, Materials Engineering, Materials Science +12