MACHINE LOSSES FROM CONVENTIONAL VERSUS NARROW ROW CORN HARVEST

H. Mark Hanna, Kris Kohl, David Haden

Applied Engineering in Agriculture · 2002 · 14 citations · 2 references

DOIFull text

Open access

Concepts

Abstract

Growers of 38cm (15in.) narrow row corn typically use either a wider row cornhead or locally modify an existinghead to this row spacing. A threeyear field experiment compared visible machine losses of a 76cm (30in.) cornhead usedon 76cm (30in.) and 38cm (15in.) rows and a single gathering chain 38cm (15in.) cornhead used on 38cm (15in.)rows. Total machine losses were divided into head and threshing/separating losses.<br><br>On matched row spacing, machine losses were generally similar between the 76 and 38cm (30 and 15in.) cornhead.However, oneyear losses from the 76cm (30in.) cornhead were statistically lower. Machine ear drop losses were excessive[0.9 to 1.3 Mg/ha (15 to 20 bu/acre) in two of three years] and unacceptable when a 76cm (30in.) cornhead was used evenat low 3.2km/h (2mph) travel speeds to harvest corn in 38cm (15in.) rows. At low feed rates, over 90% of machine lossesoccurred at the cornhead rather than in the threshing, separating, and cleaning areas. Header losses occurred due to ear dropfrom late season harvest and negligible losses inside the machine when operated at 4.8 km/h (3 mph). Although shelling ofkernels on the stalk rolls was about 1% of harvested yield or less, ear drop loss from the cornhead was greater than this amountin two of three years.

References

2