Synthesis and physical properties of layered silicates/polyurethane nanocomposites

Abstract

Abstract Samples of polyurethane nanocomposites were synthesized using diphenylmethane diisocyanate, poly(ε‐caprolactone) diol, di(ethylene glycol), and a clay functionalized by hydroxyl groups. The inorganic content in the hybrids was 2 wt %, 4 wt %, and 8 wt %. The X‐ray analysis showed that exfoliation occurred for clay content equal to 2% (w/w), whereas for higher contents, the inorganic phase rearranges in an intercalated structure. FTIR analysis suggested that the degree of hydrogen bonding in the hard segments was greatly reduced because of the amount of silicate layers and their dispersion. The dynamic‐mechanical analysis showed that the presence of clay lamellae extends very much the temperature range before the hard domain transition, causing the loss of mechanical consistency of the samples. It is less than 100 °C for the pure polymer, and increases up to 200 °C for the nanocomposites. The permeability of water vapor decreases linearly with inorganic content up to 4% of inorganic phase, and levels off at higher concentrations. The permeability behavior, at low activities, is largely dominated by the diffusion phenomenon. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2454–2467, 2005