Fatigue crack growth and crack closure in an AlMgSi alloy

Abstract

This study reports an experimental investigation of fatigue crack propagation in AlMgSi1‐T6 aluminium alloy using both constant and variable load amplitudes. Crack closure was monitored in all tests by the compliance technique using a pin microgauge. For the constant amplitude tests four different stress ratios were analysed. The crack closure parameter U was calculated and related with Δ K and the stress ratio, R . The threshold of the stress intensity factor range, Δ K th , was also obtained. Fatigue crack propagation tests with single tensile peak overloads have been performed at constant load amplitude conditions. The observed transient post overload behaviour is discussed in terms of the overload ratio, Δ K baseline level and R . The crack closure parameter U trends are compared with the crack growth transients. Experimental support is given for the hypothesis that crack closure is the main factor determining the transient crack growth behaviour following overloads on AlMgSi1‐T6 alloy for plane stress conditions.