Macromolecular Materials and Engineering · 2007 · 19 citations · 13 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsPolymer EngineeringPolymer MaterialsComposite MaterialsNanocompositesPolymer CharacterizationPolymer CompositesPolymer NanocompositesPolymer-matrix CompositesClay NanocompositesDimensional StabilityFillersInorganic FillersMechanical Properties Of NanocompositesNanocomposite MaterialsThermal PropertiesThermal Stability
Abstract Poly(propylene)‐clay nanocomposites and poly(propylene) containing conventional inorganic fillers such as calcium carbonate (CaCO 3 ) and glass fiber were used in a comparative study focusing on dimensional stability, structure, mechanical and thermal properties. Micro‐ and nanocomposites were prepared by melt blending in a twin‐screw extruder. The relative influence of each filler was observed from dimensional stability measurements and structural analysis by WAXD, TEM, and thermal and mechanical properties. At equal filler loadings, PP/clay nanocomposites exhibit an improvement in dimensional stability and were the only composites capable of reduced shrinkage in both in‐flow and cross‐flow directions. The flexural modulus of PP increased nearly 20% by compounding with 4% organoclay, as compared to a similar performance obtained by compounding with 10 wt.‐% of CaCO 3 or approximately 6 wt.‐% of glass fiber. The HDT and thermal stability of PP were enhanced by using nanoclay as filler. magnified image
13
Peter Reichert, Hansjörg Nitz, Stefan Klinke et al. · Macromolecular Materials and Engineering · 2000 · 431 citations
Natural Sciences, Materials Engineering, Materials Science +17
IEEE Electrical Insulation Magazine · 1997 · 424 citations
Polymeric Nanocomposites for Automotive Applications
Juan M. Garcés, D. J. Moll, Jozef Bicerano et al. · Advanced Materials · 2000 · 396 citations
Natural Sciences, Materials Engineering, Materials Science +17