Tribology Transactions · 2002 · 25 citations · 6 references
EngineeringMaterials EngineeringMaterials ScienceAerospace MaterialsMechanical Behavior Of MaterialsMetallic MaterialsAlloysEngine MaterialsEngine TribologyEngine WearWear ResistanceWear-resistant MaterialsCoating DeteriorationMaterial Wear AnalysisNickel-based AlloysProtective CoatingsTemperature Effects On WearTitanium AlloysWear-resistant AlloysWear-resistant Coatings
The interface between titanium compressor blades and rotors of jet engines was studied to determine the mechanisms responsible for problematic deteriorations of protective Cu-Ni-In coatings. Results indicated that at operational temperatures of 221 °C, titanium from the uncoated disk was transferred to the softer Cu-Ni-In coating on the blade. This in turn created titanium on titanium contact and resulted in fretting wear. At higher temperatures of 454 °C, copper segregation appears to be the dominant deterioration mechanism. In order to simulate these wear modes and evaluate candidate coatings, a unique testing procedure was developed that included a range of gross-slip scale displacements. Cobalt, molybdenum, tungsten carbide, and Nickel-based coatings were evaluated by this testing procedure that first involved a low-cycle series of gross-slip displacements (125μm), followed by a higher cycle series in a reduced (25μm) gross-slip regime. Results of the study revealed that an unlubricated pure-cobalt coating could protect the blade without damaging the disk at elevated temperatures. While no coatings performed exceptionally at lower temperatures, pure molybdenum exhibited some promise.
6
Fretting fatigue in engineering alloys
T.C. Lindley · International Journal of Fatigue · 1997 · 129 citations
Natural Sciences, Materials Engineering, Materials Science +12
Fretting in aircraft turbine engines
Robert L. Johnson, R. C. Bill · 1974 · 20 citations
Engineering, Aerospace Engineering, Mechanical Engineering +10