IEEE Transactions on Electromagnetic Compatibility · 1978 · 75 citations · 1 references
EngineeringElectrical EngineeringAntennasElectromagneticsMicrowave EngineeringElectrical MeasurementElectromagnetic CompatibilityElectromagnetic WavesMicrowave AntennasMicrowave MeasurementsMicrowave Transmission LinesBandwidthElectric Field UniformityElectromagnetic InterferenceElectromagnetic ShieldingHigh-frequency CharacterizationInsertion LossRadiated EmissionsVoltage Standing Wave Ratio
The study develops an absorber‑loaded TEM cell with expanded bandwidth to accurately characterize EMI fields in shielded environments. The authors experimentally compare the modified and unmodified cells, measuring RF parameters such as VSWR, insertion loss, field uniformity, and reverse coupling, and extend the absorber‑loading technique to larger 3‑× 3‑× 6‑m cells. Measurements show the modified cell’s upper useful frequency roughly doubles, and it successfully evaluates radiated emissions from a microprocessor timing circuit.
This paper discusses the development of a modified (absorber-loaded) transverse electromagnetic TEM cell with expanded bandwidth for use in accurately characterizing electromagnetic interference (EMI) fields within a shielded environment. The cell is analyzed experimentally, both before and after the modification, to determine its radio-frequency (RF) characteristics, both as an RF transmission line and as an electromagnetic (EM) field simulator or detector. Comparative measurements are given to show the performance of the modified versus the unmodified cell in parameters such as voltage standing-wave ratio (VSWR), insertion loss, test-field uniformity, and reverse-coupling characteristics. The results of these measurements indicate an approximate two-fold increase in the upper useful frequency of the modified cell. An example of using the cell to evaluate the radiated emissions from a common electronic module (microprocessor timing circuit) is given. Finally, the technique of absorber loading is extended to larger cells, specifically a 3- × 3- × 6-m cell.
1