Journal of the American Ceramic Society · 1994 · 114 citations · 14 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMaterials ChemistryBioactive GlassesBone MineralizationCalcium Phosphate BiomaterialsCalcium Phosphate MaterialsCeramic BiomaterialsGlass MaterialsApatite Crystal ChemistryApatite Crystal GrowthApatite FormationCrystal Structure Of ApatiteNonstoichiometric CompoundsNonstoichiometric OxidesPhosphate GlassesSurface Phase Stability
Apatite thin films of calcium phosphate were successfully prepared by rf‐magnetron sputtering, followed by postannealing, from calcium phosphate glass targets with Ca/P atomic ratios of 0.6 to 0.75, much lower than the stoichio‐metric value of 1.67 for hydroxyapatite. Using targets with low Ca/P ratios of 0.65 to 0.25, tricalcium and pyrocalcium phosphate thin films were obtained. The formation of these calcium phosphates phases was attributed to the phosphorus oxide losses during sputtering. H 2 O vapor was effective in the formation of the apatite phase at high temperatures; apatite was the exclusive phase in the ambient H 2 O, even when the target with the low Ca/P ratio of 0.4 was used. Based on phase stability at high temperatures, it was assumed that various kinds of apatites, such as stoichiometric and nonstoichiometric hydroxy‐ and Ca‐deficient hydroxy‐apatites were formed, depending on the composition of the glass targets.
14
J. R. Johnson · Nuclear Science and Engineering · 1965 · 2.2K citations
Natural Sciences, Materials Engineering, Materials Science +11
J.C. Trombe, G. Montel · Journal of Inorganic and Nuclear Chemistry · 1978 · 156 citations
Natural Sciences, Materials Engineering, Materials Science +16