Journal of Engineering Materials and Technology · 2007 · 16 citations · 13 references
EngineeringMaterials EngineeringMaterials ScienceMaterials CharacterizationMaterials ProcessingMetallurgyAlloy DesignMicrostructure AnalysisMicrostructure ControlMicrostructure EvolutionCompositionally Graded MaterialsDesign For Functionally Graded MaterialsExperimental StudiesMicrostructural ChangeMicrostructural EngineeringMicrostructure CharacterizationVolume Fraction Effects
Background. A centrifugal solid-particle method has been successfully used as a means to fabricate functionally graded materials (FGMs). Various processing parameters significantly influence the formation of the graded microstructural and properties distribution in these FGMs. Method of Approach. Alloys with different Al3Ti platelet volume fractions and platelet sizes are used to study the effects of those parameters on graded distributions of the volume fraction and orientation of platelets. Al-platelet/plaster FGMs are used as a model system, and the effects of the same parameters are investigated. Results. It was found that an increase in initial volume fraction and particle size leads to steeper gradients of volume fraction and orientation distributions within the Al-Al3Ti FGMs. The results of the experimental studies are compared to those of the model material. Conclusions. It was verified that, although with some limitations, the proposed model system will be useful in the study of the formation mechanisms of the graded distributions in the FGMs.
13
Yoshimi Watanabe, Noboru Yamanaka, Yasuyoshi FUKUI · Composites Part A Applied Science and Manufacturing · 1998 · 179 citations
Natural Sciences, Materials Engineering, Materials Science +12
Yasuyoshi FUKUI · JSME international journal Ser 3 Vibration control engineering engineering for industry · 1991 · 165 citations · Full text