Environmental Technology · 2011 · 92 citations · 31 references
EngineeringChemical EngineeringEnvironmental EngineeringInorganic ChemistryWastewater TreatmentWater TreatmentAdsorption ProcessesIon ExchangeNutrient RemovalPhosphorus ManagementPhosphorus RecoveryPhosphorus RemovalAdsorbent CapacityAdsorption CapacityHydrous Oxide SorptionPhosphate DesorptionPhosphate RemovalPhosphate SorptionPhosphorus Removal KineticsPseudo-second-order Kinetics
Synthetic ZrO2 x nH2O was used for phosphate removal from aqueous solution. The optimum adsorbent dose obtained for phosphate adsorption on to hydrous zirconium oxide was 0.1 g. The kinetic process was described very well by a pseudo-second-order rate model. The phosphate adsorption tended to increase with the decrease in pH. The adsorption capacity increased from 61 to 66 mg g(-1) when the temperature was increased from 298 to 338 K. A phosphate desorption of approximately 74% was obtained using water at pH 12.
31
Study on the adsorption of Neutral Red from aqueous solution onto halloysite nanotubes
Peng Luo, Yafei Zhao, Bing Zhang et al. · Water Research · 2009 · 540 citations
Phosphate removal from wastewater using red mud
Weiwei Huang, Shaobin Wang, Zhonghua Zhu et al. · Journal of Hazardous Materials · 2008 · 475 citations
Engineering, Chemical Engineering, Environmental Engineering +13