Superconductor Science and Technology · 1997 · 13 citations · 8 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMetallic MaterialsMetallurgyComposite MaterialsPowder MetallurgyPowder ProcessingPowder TechnologySuperconducting MaterialsConsolidation BehaviourParticle-size DistributionPowder ConsolidationPowder DensificationPowder Metallurgy ProcessingSuperconducting CompositesSuperconducting TapesSuperconducting Wires
The powder-in-tube process has been widely used to fabricate long lengths of (Bi-2212) superconducting wires and tapes. However, there is not a good understanding of the processing variables involved in the wire-drawing process. Recent studies indicated that powder characteristics, such as particle size distribution and morphology, had a significant effect on the consolidation behaviour of Bi-2212 green compacts. In this investigation, silver-clad Bi-2212 composite wires containing powders of two different particle sizes were fabricated. The effects of initial packing density and sheath thickness on the characteristics of the wires, including elongation, silver:core ratio and relative core density, were investigated. It is observed that coarse powders with a wide particle size distribution produce wires with higher core density and a moderate benefit is obtained from higher initial powder packing density.
8
Katsumi Nomura, Masahiro Seido, Hitoshi Kitaguchi et al. · Applied Physics Letters · 1993 · 69 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +14
M. S. Karuna, J. A. Parrell, D. C. Larbalestier · IEEE Transactions on Applied Superconductivity · 1995 · 46 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17
Jun‐ichi Shimoyama, Jun-ichiro Kase, Takeshi Morimoto et al. · Japanese Journal of Applied Physics · 1992 · 33 citations
Natural Sciences, Materials Engineering, Materials Science +17