Journal of Experimental Biology · 2003 · 277 citations · 26 references
EngineeringEntomologyZoologyAerodynamicsAeroelasticityInsect PhysiologyAeroelastic LoadsAeroelastic ModelingDynamic AeroelasticityStatic AeroelasticityWing AerodynamicsWing TheoryAerodynamic Force GenerationAerodynamic Force ModelingAeroelastic AnalysisFlightInertial LoadsWing AeroelasticityWing FlexibilityWings Deformation
In insect flight, wings experience both aerodynamic and inertial‑elastic forces, but the relative contribution of each to passive wing deformation remains unclear, and if aeroelastic effects are minor, simpler models of flexible wings could be developed. The study aimed to determine how aerodynamic and inertial‑elastic forces contribute to wing bending in the hawkmoth *Manduca sexta*. Researchers flapped fresh *Manduca* wings on a motor at realistic kinematics in air and helium, then compared bending patterns and used a simplified finite element model to isolate fluid‑damping effects. The 85 % reduction in air density caused only slight changes in wing deformation, indicating fluid‑dynamic forces play a minimal role, and the finite element analysis suggests damped models without fluid forces can predict deformation patterns.
SUMMARY During flapping flight, insect wings must withstand not only fluid-dynamic forces, but also inertial-elastic forces generated by the rapid acceleration and deceleration of their own mass. Estimates of overall aerodynamic and inertial forces vary widely, and the relative importance of these forces in determining passive wing deformations remains unknown. If aeroelastic interactions between a wing and the fluid-dynamic forces it generates are minor compared to the effects of wing inertia, models of insect flight that account for passive wing flexibility would be far simpler to develop. We used an experimental approach to examine the contributions of aerodynamic and inertial-elastic forces to wing bending in the hawkmoth Manduca sexta. We attached fresh Manduca wings to a motor and flapped them at a realistic wing-beat frequency and stroke amplitude. We compared wing bending in normal air versus helium (approx. 15% air density), in which the contribution of fluid-dynamic forces to wing deformations is significantly reduced. This 85% reduction in air density produced only slight changes in the pattern of Manduca wing deformations, suggesting that fluid-dynamic forces have a minimal effect on wing bending. We used a simplified finite element model of a wing to show that the differences observed between wings flapped in air versus helium are most likely due to fluid damping, rather than to aerodynamic forces. This suggests that damped finite element models of insect wings (with no fluid-dynamic forces included) may be able to predict overall patterns of wing deformation prior to calculations of aerodynamic force production, facilitating integrative models of insect flight.
26
Wing Rotation and the Aerodynamic Basis of Insect Flight
Michael H. Dickinson, Fritz‐Olaf Lehmann, Sanjay P. Sane · Science · 1999 · 2.6K citations
Life Sciences, Biology, Entomology +14