Peel process simulation of sealed polymeric film computational modelling of experimental results

Gordon Geißler, Michael Kaliske, Michael Nase, Wolfgang Grellmann

Engineering Computations · 2007 · 28 citations · 19 references

Concepts

Abstract

Purpose The purpose of this paper is to evaluate current simulation capabilities for thin film delamination on the basis of real test data as well as a contribution to its extension in order to partly substitute experimental investigations. Design/methodology/approach The proposed model consists of a formulation that describes the behaviour of the bulk material and an approach that introduces the film's delamination capability. An implicit finite element framework with a cohesive zone implementation is used and described in detail. The numerical results on the basis of the a priori identified material parameters are related to the experimental work. In order to capture the obvious peel speed dependency of these delamination processes, a viscoelastic cohesive formulation is introduced and compared with a pure separation rate dependent cohesive material in the second part of this contribution. Findings The performed numerical simulations show a good approximation of the experimental peel process. The extension in order to take time-dependent effects into account is required for the simulation of such problems. In contrast with the pure rate-dependent model, the presented consistent formulation of the cohesive part is able to cover the whole range of observed material phenomena. Research limitations/implications Owing to the absence of suitable experimental single mode investigations of the sealed layer, the used cohesive material parameters are identified in relation to the pre-existing experimental results. Furthermore, the resultant peel force has a constant value due to the assumed homogeneous cohesive material and therefore gives only a mean approximation of the experimental values at this stage of the investigation. Originality/value The numerical representation of such a thin film delamination process in relation to real experimental results shows the additional capabilities and the usability of the implicit finite element method with a cohesive zone implementation in a clear and illustrative way. The first proposed cohesive extension based on a rheological model shows the capability to cover the full range of time-dependent interface layer behaviour.

References

19