Journal of Nuclear Science and Technology · 2004 · 67 citations · 14 references
EngineeringMechanical EngineeringNuclear EngineeringComputational Fluid DynamicsHeat TransferThermal AnalysisFluid PropertiesHeat Transfer In ReactorsReactor Core DesignTemperature Control In ReactorsThermal DesignThermal-hydraulic Safety AnalysisLinear StabilityLinear Stability AnalysisLinear Stability TheoryThermal Hydraulic AnalysisThermal StabilityThermal-hydraulic StabilityThermal-hydraulic Stability AnalysisThermal-hydraulics
A frequency‑domain linear stability analysis code was developed for SCLWR‑H at constant supercritical pressure, linearizing discretized 1‑D single‑phase conservation equations, incorporating water‑rod effects, and evaluating full‑ and partial‑power normal operations with a parametric study of key stability parameters. The analysis shows that despite low coolant flow and large core density changes, SCLWR‑H remains thermally‑hydraulically stable during normal operation and constant‑pressure startup power‑raising when an inlet orifice pressure‑drop coefficient is applied to the fuel assemblies.
This paper summarizes the analysis results of the thermal-hydraulic stability of a high-temperature reactor cooled and moderated by supercritical-pressure light water (SCLWR-H). A linear stability analysis code in the frequency domain was developed to study the thermal-hydraulic stability of SCLWR-H at constant supercritical pressure. The analysis method is based on linearization by perturbation of numerically-discretized one-dimensional single-channel single-phase conservation equations. The effect of water rods on stability is considered. The thermal-hydraulic stability of SCLWR-H for full-power and partial-power normal operations was investigated by frequency domain method. Our analysis reveals that though SCLWR-H has low coolant flow rate and large density change in the core, the thermal-hydraulic stability can be maintained both at normal operation and during power raising phase of constant pressure startup by applying an orifice pressure drop coefficient at the inlet of the fuel assemblies. A parametric study was also carried out to determine the parameters affecting the stability.
14
D.L. Hetrick, Dahsoong Yu · IEEE Transactions on Nuclear Science · 1973 · 341 citations
Engineering, Electrical Engineering, Nuclear Engineering +16
<i>Control of Nuclear Reactors and Power Plants</i>
M. A. Schultz, T. Teichmann · Physics Today · 1956 · 112 citations