SPE Annual Technical Conference and Exhibition · 2010 · 33 citations · 5 references
EngineeringPetroleum EngineeringOffshore Petroleum EngineeringReservoir EngineeringReservoir SimulationLiquid LoadingReservoir OperationWell HydraulicsWell ModelingWellbore FlowWellbore HydraulicsLiquid Loading MitigationNear-wellbore FlowReservoir-wellbore CouplingSevere Liquid LoadingTransient Wellbore FlowWell ModellingWellbore ModelingWellbore-reservoir Coupling
Abstract The regulated intermittent gas production by automated on/off of the wellhead choke, also called "well cycling", is often the only short-term option that the offshore operators can practice in order to prolong the well production life once they are loaded up by liquid. The field experiences show that many wells can be cycled for quite a long period, but some other wells may have no cycling capability at all. For the wells that can be cycled, the average production achieved by the cycling also depends on whether and how this process is controlled. These bring in a large uncertainty in predicting the field tail-end production. This paper is therefore concerned with the numerical modeling and simulation of the regulated well cycling. As the process involves both wellbore and near-wellbore reservoir dynamics, an integrated modeling approach is adopted through coupling a transient well flow model to a near-wellbore reservoir model. The coupled model was successfully used to investigate the cycling potential of a 3-km deep vertical well that produces from a depleted cylindrical reservoir of 100 meters in thickness and 560 meters in radius. The simulation results confirm that the selected well can be cycled for a long period only if the operator pro-actively starts the cycling before the well is loaded up by liquid. The simulation also shows that the average gas production for the selected well can be at least doubled compared with the meta-stable production rate resulting from leaving the choke permanently open, which confirms the advantage of well cycling. The major observation in this paper may fundamentally change the offshore gas well operation strategy as that the operators may start well cycling once they foresee liquid loading is soon due to occur in their wells. Besides, the simulation procedure presented can provide advices on how to optimize the timing of the choke on/off operation to maximize the average production.
5
The Dynamic Two-Fluid Model OLGA: Theory and Application
Kjell H. Bendlksen, D. Malnes, Randl Moe et al. · SPE Production Engineering · 1991 · 681 citations
Simulating Liquid Loading in Gas Wells
W. Schiferli, Stefan Belfroid, S. Savenko et al. · TNO Repository · 2010 · 14 citations