Polymer-Plastics Technology and Engineering · 1989 · 71 citations · 12 references
EngineeringMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsMelt RheologyPolymer DegradationPolymer ExtrusionPolymer ProcessingPolymer RheologyViscoplastic BehaviorExtensional ViscosityMelt Flow BehaviorPlug Flow BehaviorPolymer Melt FlowPolymer Melt ViscosityShear RateShear ViscosityViscosity
Abstract Experimental and modeling studies of the free-radical-induced degradation of polypropylene (PP) in the melt phase have been carried out. Experiments have been performed in a single-screw plasticating extruder using a peroxide as the free-radical source. Concentration of the peroxide was in the range 0.01–0.6 wt%. Results in the form of melt flow index (MFI) values, viscosity curves, and molecular weight distribution (MWD) of the produced resins are presented here. Based on these results, a constitutive equation describing the shear viscosity of the melt as a function of shear rate, temperature, and molecular weight has been derived. The extensional viscosity of these resins has been determined as a function of strain rate using Cogswell's analysis of converging flows. A previously developed kinetic model (plug flow) has been used to simulate the changes of the average molecular weights of the MWD, and a sensitivity analysis of this model has been carried out.
12
Some problems in particle technology
Hugh M. Hulburt, Stacy Katz · Chemical Engineering Science · 1964 · 1.6K citations
Rheology in polymer processing
F.N. Cogswell · Journal of Non-Newtonian Fluid Mechanics · 1977 · 680 citations