Water-Based Formation Imaging and Resistivity Logging in Oil-Based Drilling Fluids-Today’s Reality

Harald Laastad, E. Haukefaer, Susan Young, Ahmadi Tehrani, P. Delaunay, K. Feather, John Phillips, Sandra Marca

SPE Annual Technical Conference and Exhibition · 2000 · 10 citations · 2 references

Concepts

Abstract

Abstract Historically, acquiring borehole image logs and resistivity at the bit measurements of useable resolution have been difficult, if not impossible, when using oil-based drilling fluids. Conversely, in many applications, drilling objectives and other performance criteria prohibit the use of water-based fluids, which deliver logs of higher resolution. Azimuthal borehole images in oil-based mud systems are delivered by wireline conveyed ultrasonic measurements or azimuthal density measurements made while drilling. Higher resolution images have generally been out of reach in oil-based systems because the measurement technology used to deliver these services involves passing electric current through a conductive borehole fluid. Resistivity-at-bit devices used for geostopping and geosteering also rely on electric current transmission from the bit to the formation and are optimized for a conductive mud system. In many applications, drilling objectives and other performance criteria prohibit the use of water-based fluids, thus placing high-resolution images, resistivity-at-the-bit, and the high-value applications that these services can deliver out of reach of the reservoir evaluation and well placement teams. This paper describes the development and successful application of a conductive oil-based drilling fluid system that produces water-based logging quality and enhanced geosteering without sacrificing the performance advantages of invert-emulsion fluids. This unique system, employs an electrically conductive continuous phase that provides a high-performance fluid with a conductive mud, filter-cake and filtrate. The authors detail the development of the system, which included a yard test where fluids of varying conductivity were circulated through a test well with formation micro imager response determined and compared against measured conductivity. Further, the authors discuss the application of this new system on the Gullfaks South in the Norwegian sector of the North Sea, where the fluid was used to drill a highly deviated well through complex geological structures. In this application the fluid showed the drilling performance expected from an invert-emulsion oil-based fluid (i.e. high penetration rates, wellbore stability and low torque/drag). Results from formation micro image logs and resistivity-at-bit measurements taken using this fluid are presented and discussed. The authors also review lessons learned in the development and field application of this conductive fluid, and address current limitations and future developments.

References

2