International Journal of Turbo and Jet Engines · 2011 · 21 citations · 7 references
EngineeringAerospace EngineeringMechanical EngineeringAerodynamicsFlow VisualizationPropulsionExperimental AerodynamicsJet PropulsionNozzle DesignSubsonic AerodynamicsSupersonic AerodynamicsConvergent NozzlesJetsMach NumberNozzle ControlNozzle PerformanceNozzle Pressure EffectsNozzle Pressure RatioVelocity Distribution
This paper presents the effectiveness of perforated arc tabs to enhance the mixing of axi-symmetric subsonic and sonic jets. Measurements of centerline velocity decay and velocity distribution in the directions along and normal to the tabs were carried out in the controlled jet, from a convergent nozzle with two arc-tabs placed at diametrically opposite locations at the nozzle exit, were carried out. Similar measurements were done for the uncontrolled jets, for comparison. Mach 0.6, 0.7, 0.9 and sonic jet at nozzle pressure ratios 2 and 3 were tested. It is found that the perforated arc-tabs greatly enhance the jet mixing of both subsonic and sonic jets. The core length comes down by 65%, 66%, 62% and 75%, for Mach 0.6, 0.7, 0.9 and correctly expanded Mach 1 jets, respectively.
7
The distortion of a jet by tabs
L. J. S. Bradbury, Ali Hadi. Khadem · Journal of Fluid Mechanics · 1975 · 330 citations
Experimental Studies on the Limiting Tab
E. Rathakrishnan · AIAA Journal · 2009 · 79 citations
Corrugated Tabs for Supersonic Jet Control
B. Chiranjeevi Phanindra, E. Rathakrishnan · AIAA Journal · 2010 · 56 citations
Subsonic and Transonic Jet Control with Cross-Wire
P. Lovaraju, E. Rathakrishnan · AIAA Journal · 2006 · 51 citations