2008 · 32 citations · 16 references
EngineeringEarth SciencesPetroleum EngineeringGeotechnical EngineeringHydraulic FracturingReservoir EngineeringFracture ConductivityFracture PropagationFractured Reservoir FlowNaturally Fractured ReservoirsRock FractureClaysDamage MechanismsFracture Hydraulic ConductivityFracturesHydraulic Conductivity In Fractured RockLong-term Conductivity DegradationProppant CrushingTime-dependent Conductivity Loss
Abstract Fracture conductivity values observed by well testing following hydraulic fracture stimulation treatments are often much lower than the values obtained by laboratory measurements for most proppants. In addition, many stimulated wells show loss of fracture conductivity with time, leading to reduced productivity and lost revenue. This rapid loss in fracture conductivity has been attributed to frac gel damage, embedment, proppant crushing, and fines invasion. All these damage mechanisms have been well studied in the laboratory, resulting in materials and methods employed to minimize their effect on conductivity. While these methods have improved productivity, stimulated wells rarely achieve the theoretical conductivity expected from a given proppant. In addition, fracture conductivity often declines continuously, suggesting that there are other factors that influence long-term fracture conductivity. Recently it was suggested that a freshly placed proppant bed in a hot formation could undergo a geochemical process called diagenesis. This process involves the dissolution of some proppant minerals and subsequent reaction with minerals that are present in connate formation water. These subsequent reactions lead to the formation of many clays and clay-like crystals in addition to amorphous, porosity-filling materials that progressively damage the conductivity of propped fractures. This paper presents (1) results of a laboratory study aimed at quantifying this damage mechanism, (2) the development of multiple strategies to minimize this damage mechanism, and (3) field case studies analyzing production data to support two of these laboratory-indicated strategies. Findings reported in this paper should have a significant impact on how proppants are selected for various fracturing applications. To achieve maximum fracture conductivity and sustained production, it is no longer acceptable to simply select the proppants, based on API conductivity, cost, and availability, but planners must also consider (1) potential in situ reactions that may shorten proppant life or (2) proppant treatments that can be applied to minimize the impact of these reactions.
16
Sustaining Fracture Conductivity
Jim Weaver, Philip Nguyen, Mark Parker et al. · Proceedings of SPE European Formation Damage Conference · 2005 · 62 citations
Engineering, Geological Engineering, Petroleum Engineering +15