Environmental Progress · 2004 · 28 citations · 22 references
EngineeringChemical EngineeringPetroleum EngineeringBiochemical EngineeringBioprocess EngineeringBioreactor DesignBiofuel ProductionBioreaction EngineeringBioreactor HydrodynamicsBioreactor OperationOxygen TransferTransport In BioreactorsAeration Rate EffectsAirlift Bioreactor HydrodynamicsAirlift BioreactorsAirlift ReactorsBioreactor Process DesignOxygen Transfer CoefficientVolumetric Oxygen Transfer CoefficientVolumetric Oxygen Transfer Rate
Abstract The effects of important design and operating parameters on the hydrodynamics and oxygen transfer characteristics of draft‐tube airlift bioreactors (DTABs) were investigated. A water‐in‐kerosene microemulsion system was used inside the DTAB to simulate the physicochemical properties of the fermentation broths used in petroleum biodesulfurization (BDS) processes. For this system, the churn‐turbulent regime occurred at higher air flow rates compared to those of water‐based systems. An increase in draft‐tube surface area was found to be a more effective means for enhancement of both mixing and oxygen transfer than an increase in top‐section surface area expansion. An increase in the draft‐tube height and liquid level had a similar effect on the performance of DTABs containing the microemulsion or water‐based media. Correlations were developed that predicted overall and local gas holdups, liquid velocity, mixing time, and overall volumetric oxygen transfer coefficient as a function of aeration rate, bioreactor geometry, and liquid level inside the DTAB containing water‐in‐oil microemulsion for all experimental conditions examined. © 2004 American Institute of Chemical Engineers Environ Prog, 23: 206–214, 2004
22
Design parameters estimations for bubble column reactors
Y. T. Shah, B.G. Kelkar, S. P. Godbole et al. · AIChE Journal · 1982 · 1.2K citations