1980 · 10 citations · 5 references
Natural SciencesAerospace EngineeringAcoustic DesignAcousticsFluid DynamicsAeroacousticsAeroacoustics SimulationEngine TestingTurbofan EnginesTurbulenceTurbulent FlowFabricationFan NoiseFlightInflow ControlInflow Control DevicesInflow DistortionTransducer DesignTurbofan Noise Reduction
To enable accurate simulation of in-flight fan tone noise during ground static tests, four devices intended to reduce inflow disturbances and turbulence were tested with a JT15D-1 turbofan engine. These inflow control devices (ICD's) consisted of honeycomb/screen structures mounted over the engine inlet. The ICD's ranged from 1.6 to 4 fan diameters in size, and differed in shape and fabrication method. All the ICD's significantly reduced the BPF tone in the far-field directivity patterns, but the smallest ICD's apparently introduced propagating modes which could be recognized by additional lobes in the speeds; at supersonic fan tip speed the smallest ICD's had some measurable loss, but the largest had no loss. Data from a typical transducer show that the unsteady inflow distortion modes (turbulence) were eliminated or significantly reduced when either of the ICD's was installed. However, some steady inflow distortion modes remained.
5
Richard P. Woodward, J. A. Wazyniak, L. SHAW et al. · The Journal of the Acoustical Society of America · 1977 · 15 citations · Full text
Engineering, Aerospace Engineering, Mechanical Engineering +17