A new look at gravel pack carrier fluid properties

R.F. Scheuerman

Soc. Pet. Eng. AIME, Pap.; (United States) · 1984 · 13 citations · 0 references

Concepts

Abstract

For gravel pack carrier fluids, less viscosity is needed downhole than for suspending and pumping high gravel loadings on the surface. To achieve this dual viscosity need, breakers are added to degrade the viscosifying polymers. Unfortunately, viscosity breakback criteria are not well defined. In addition to the type and concentration of breaker and temperature, the apparent viscosity breakback time of a polymer solution also depends on the shear rate at which the viscosity is measured. As a result, industry breakback data generally disagree because of the variety of instruments and shear rates used to measure viscosity. This paper discusses two new viscosity breakback criteria for gravel packing carrier fluids: The time for the apparent viscosity at 0.03 sec/sup -1/ to decrease to 1000 cp, and start of compaction of the settled gravel bed. These criteria correlate well with fluid performance and apply to slurries with different initial viscosities (including crosslinked gels), brine densities, and gravel sizes. Data useful for formulating gravel pack carrier fluids are also presented. Although this paper does not define optimum downhole carrier fluid properties, the new criteria reflect downhole conditions better than most previous criteria. They should give better correlation with model studies and field experience, more » and, in turn, lead to a better understanding of the requirements for optimum downhole performance. « less