Modeling two-dimensional detonations with detonation shock dynamics

John B. Bdzil, D. Scott Stewart

Physics of Fluids A Fluid Dynamics · 1989 · 98 citations · 8 references

DOIFull text

Open access

Concepts

TL;DR

Current two‑dimensional explosive‑engineering models inadequately resolve the detonation reaction zone and the broad gas expansion region, limiting their predictive accuracy. The new method, valid when the shock curvature radius far exceeds the reaction‑zone length, models the quasisteady interaction between heat release and two‑dimensional flow via a Dn(κ) relation combined with the kinematic surface condition, reducing the problem to a one‑dimensional calculation. An alternative reaction‑zone modeling method has been recently developed.

Abstract

One of the principal shortcomings of the computer models that are presently used for two-dimensional explosive engineering design is their inadequate treatment of the explosive’s detonation reaction zone. Current methods lack the resolution to both calculate the broad gas expansion region and model the thin reaction zone with reasonable detail. Recently an alternative method for modeling the reaction zone has been developed. This method applies when the radius of curvature of the shock is large compared to the reaction-zone length. In this limit, the dynamics of the interaction between the chemical heat release and the two-dimensional flow in the reaction zone is quasisteady. It is summarized by a relation Dn(κ), between the local normal shock velocity Dn and shock curvature κ. When this relation is combined with the kinematic surface condition (an equation that describes how disturbances move along the shock), the two-dimensional reaction-zone calculation is reduced to a one-dimensional calculation.

References

8