Physics Procedia · 2014 · 35 citations · 8 references
EngineeringMaterials EngineeringMaterials ScienceJoiningMetallurgyNaval ArchitectureLaser Beam WeldingLaser Material ProcessingShip ConstructionWeldingWelding ProcessesLaser JoiningLaser WeldingNon-destructive TestingTitanium Alloy JoiningWeld Pool BehaviorWeld Pool MonitoringWeld Quality AssessmentWelding Parameters
The ever larger requirements of the material selection in the range of maritime industry necessitate the application of high-tech materials. Titanium because of its excellent mechanical properties at low weight is an attractive alternative for the construction of ships. The goal of this investigation was to design a welding method for joining samples of 16 mm thick Ti3Al2.5 V. The welding experiments with a 20 kW Yb-fiber laser source and varying combinations of parameters were intended to qualify the laser beam welding process. The welding results were analyzed by non-destructive and destructive testing. In addition, the welding tests were recorded with two high-speed cameras to observe the weld pool and the vapor plume. The evaluation of the high-speed images in correlation with the results of non-destructive testing shows, that a significant improvement of process stability and weld quality can be achieved by the suppression of the vapor plume.
8
National Technical Information Service
Suzanne L. Holcombe · Reference Reviews · 2008 · 615 citations
Vapor–plasma plume investigation during high-power fiber laser welding
Pavel Shcheglov, Andrey Gumenyuk, Igor B. Gornushkin et al. · Laser Physics · 2012 · 95 citations
Natural Sciences, Physics, Optics +16
Plume attenuation of laser radiation during high power fiber laser welding
Pavel Shcheglov, S. A. Uspenskiy, Andrey Gumenyuk et al. · Laser Physics Letters · 2011 · 80 citations
Natural Sciences, Physics, Optics +16