SAE technical papers on CD-ROM/SAE technical paper series · 2013 · 31 citations · 22 references
EngineeringChemical EngineeringChemistryChemical KineticsCombustionReaction EngineeringCombustion FundamentalsCombustion KineticsCombustion ProcessesCombustion ThermodynamicsIgnitionPremixed CombustionChemical Kinetics Of IgnitionIgnition DelayIgnition Delay EffectsLow-temperature CombustionPartial Premixed CombustionPartially Premixed CombustionPremixed IgnitionSurrogate Fuel Kinetics
<div class="section abstract"><div class="htmlview paragraph">Fuel effects on ignition delay and low temperature reactions (LTR) during partially premixed combustion (PPC) were analyzed using Design of Experiments (DoE). The test matrix included seventeen mixtures of n-heptane, isooctane, toluene and ethanol covering a broad range of ignition quality and fuel chemistry. Experiments were performed on a light-duty diesel engine at 8 bar IMEP<sub>g</sub>, 1500 rpm with a variation in combustion phasing, inlet oxygen concentration and injection pressure. A single injection strategy was used and the start of injection and injection duration were adjusted to achieve the desired load and combustion phasing. The experimental data show that fuels with higher Research Octane Number (RON) values generally produced longer ignition delays. In addition, the alcohol content had significantly stronger effect on ignition delay than the aromatic content. Fuels with more ethanol gave longer ignition delays and a combination of high level of ethanol and toluene produced the longest ignition delay. An increased inlet oxygen concentration shortened the ignition delay. Surprisingly and in contradiction to what has been reported for HCCI combustion, ethanol amplified the LTR phase, while n-heptane suppressed it. Finally, the LTR phase was proportional to the ignition delay. Longer ignition delay resulted in higher fraction of LTR.</div></div>
22
Internal combustion engine fundamentals
Choice Reviews Online · 1988 · 16.8K citations
Engineering, Chemical Engineering, Mechanical Engineering +17