Kinetics and crystal structure of poly(lactic acid) crystallized nonisothermally: Effect of plasticizer and nucleating agent

Hanwen Xiao, Yang Li, Xiaomin Ren, Tao Jiang, Jen‐Taut Yeh

Polymer Composites · 2010 · 70 citations · 56 references

Concepts

Abstract

Abstract The kinetics of neat poly(lactic acid) (PLA) and its composites with triphenyl phosphate (TPP) and/or talc crystallized nonisothermally at different cooling rates of 1, 2.5, 5, 7.5, and 10°C/min was analyzed by differential scanning calorimetry and described by Avrami equation and combined Avrami‐Ozawa equation. The results showed that talc acted as PLA nucleating agent accelerated crystallization rate by decreasing the crystallization half‐time t 1/2 or rate parameter F(T ), whereas TPP acted as PLA plasticizer decreased crystallization rate. For neat PLA and plasticized PLA, the average values of Avrami exponent n were almost close to each other, but added TPP decreased crystallization rate constant k . As for PLA composites with talc, the crystallization process was relatively complex, and was divided into three regimes. At a given cooling rate, the value of n 2 was almost larger than that that of n 1 or n 3 , whereas the value of k 2 was less than that of k 1 or k 3 . The effective activation energy Δ E x calculated from Friedman formula increased with the increase of relative crystallinity and TPP content, whereas decreased with the presence of talc. Wide angle X‐ray diffraction verified that all samples crystallized nonisothermally in cooling rate range of 1–10°C/min form α‐form. POLYM. COMPOS., 31:2057–2068, 2010. © 2010 Society of Plastics Engineers

References

56