SPE Annual Technical Conference and Exhibition · 2008 · 10 citations · 2 references
EngineeringMarine EngineeringOcean EngineeringOffshore StructuresWater Quality EngineeringWater TreatmentOffshore Pipeline EngineeringSubsea PipelinesWax DepositionDispersant ApplicationParaffin MitigationParaffin RemovalPipeline DecontaminationPipelinesWax Deposition In PipelinesWax Deposition RemovalWax Removal
Abstract This paper presents a case history of inspecting, cleaning and re-establishing communication in a deepwater pipeline that had plugged because of paraffin deposition over an extended period. Early mitigation attempts did not remove the solid mass causing the blockage but, rather, compounded the problem. A chemical capable of dispersing the wax mass was applied to the plugged pipeline through a snubbing unit. Access to the pipeline and the wax plug was gained by disconnecting the line at the subsea site, lifting the pipeline to a work rig, installing the snubbing unit and applying the chemical solution in sea water at a prescribed dilution ratio. One critical step in dispersing and removing the solid wax mass was selecting the dispersant package. In addition, after the correct chemistry was identified, its application required a complex operation. A snubbing unit inside the pipeline jetted the chemical dispersant and drilled through the wax mass. The dispersed fluid was then returned to the working rig where the paraffins were disposed. The operation was successful and the pipeline was placed back into production. However, it was complicated by the ocean floor topography: The deepwater environment adds a degree of difficulty that is not experienced in shelf waters or on land. The exercise taught several lessons, the most significant being that a slow and consistent effort is ideal. Once the mass is dispersed it is best to continuously remove this fluid. Stop-and-start operations allow the solubilized mass to re-solidify as the solvent drains away from the mass under static conditions. Although operators would like for all operations to proceed according to plan, unforeseen and undesirable situations arise. In the case of a plugged pipeline, several causes need to be investigated in order to prevent future occurrences. Operators need to know that operational experience combined with application chemistry exists to help unplug a deepwater pipeline.
2
T. A. Swanson, M. Petrie, T.R. Sifferman · Proceedings of SPE International Symposium on Oilfield Chemistry · 2005 · 11 citations