Measurement of Non-Uniform Residual Stresses Using the Hole-Drilling Method. Part II—Practical Application of the Integral Method

G. S. Schajer

Journal of Engineering Materials and Technology · 1988 · 297 citations · 0 references

Concepts

TL;DR

The Integral Method uses strain‑relaxation data from the incremental hole‑drilling technique to compute non‑uniform residual stress fields. Finite‑element analyses were performed to determine calibration coefficients, which were tabulated for various hole sizes and depths. The hole‑drilling method is unsuitable for stresses far from the surface, with a theoretical depth limit of 0.5 rm and a practical limit of 0.3–0.4 rm.

Abstract

The Integral Method for calculating non-uniform residual stress fields using strain relaxation data from the incremental hole-drilling method is examined in detail. Finite element calculations are described which evaluate the calibration coefficients required for practical applications of the method. These calibration data are tabulated for a range of hole sizes and depths. It is found that the hole drilling method is not well adapted to measuring stresses remote from the surface, and a theoretical depth limit for stress measurements of 0.5 of the mean radius of the strain gauge rosette, rm, is identified. A practical depth limit is in the range 0.3–0.4 rm.