Importance of Predicted Cementing Temperatures for Critical HP/HT Casing Design: Guidelines and Case Studies

Albert R. McSpadden, Simon Glover

SPE Annual Technical Conference and Exhibition · 2008 · 18 citations · 5 references

Concepts

Abstract

Abstract Estimation of drilling and cementing temperatures using standard models and simulation tools is essential for robust casing design of critical HPHT wells. Standard casing and tubular analysis defines loads in terms of changes in thermal, pressure and mechanical conditions from an initial installed state. Often, the casing initial temperature conditions are assumed to be prevailing geothermal undisturbed temperatures (UDT). This is typically considered a conservative assumption which simplifies the design process and avoids definition or verification of the relevant sequence of drilling and cementing operations. However, for critical HPHT wells where design margins can be narrow, it may be necessary to describe the initial physical conditions as accurately as possible and to incorporate them into the casing design analysis. In this paper, the general methodology of engineering based casing design is reviewed and practical guidelines are presented to suggest when extra effort to accurately model initial casing temperatures may be critical and why conventional assumptions may be nonconservative. Because the current industry environment is placing significant demands on operator organizations and engineering staff, the time and effort required to gather data or to determine proper assumptions for detailed well design has to be justified. All other things being equal, simple worst-case assumptions which facilitate quick analysis and decision processes are favored over more detailed modeling. However, with the wells being constructed today increasingly classified as critical HPHT wells, the need for thorough and realistic model-based casing design must be identified when it is required. The case studies considered in this work result from a review of a wide range of critical HPHT well designs. It is significant that some combinations and load conditions indicate that assuming undisturbed geothermal temperatures is not necessarily conservative. This can be related to constrained thermal expansion in cemented zones.

References

5