Simulating the Thermal Response of Thin Films During Photonic Curing

Martin Guillot, Steve C. McCool, Kurt Schroder

2012 · 22 citations · 7 references

Concepts

Abstract

A new technology utilizing short high-intensity pulsed xenon flashlamps has been termed “photonic curing”, and has become an efficient method for thermally processing thin film metal inks on inexpensive, low temperature substrates. For each film/substrate combination there is an optimum set of pulse conditions that will cure a given material stack most efficiently without damaging the substrate. The temperature distribution in the film stack is controlled by varying one or more of several pulse parameters such as peak intensity, pulse length, and frequency of pulse repetition. Given the large combination of possible pulse parameters and candidate materials, it is critical to be able to determine the set of pulse conditions that most efficiently cure the various possible combinations of candidate material stacks without damaging them. In this effort, a modeling tool is developed to simulate photonic curing. The model couples a transient 1-D heat conduction model to an intuitive graphical user interface, and contains a comprehensive materials database of temperature-dependent thermal and material properties for a large number of candidate film materials. The governing heat conduction equation is discretized using the finite volume method, including an algorithm to optimize mesh spacing and time stepping based on spatial and temporal temperature gradients. The simulation tool is validated using known analytical and semi-analytical solutions based on Green’s function solutions. It is then applied to a typical film stack used in photonic curing.

References

7