CO<sub>2</sub>‐Induced Mechanical Reinforcement of Polyolefin‐Based Nanocellular Foams

Rahida Wati Sharudin, Masahiro Ohshima

Macromolecular Materials and Engineering · 2011 · 51 citations · 22 references

DOIFull text

Open access

Concepts

Abstract

Abstract The effect of CO 2 ‐induced crystallization on the mechanical properties, in particular the yield and the ultimate stresses, of polyolefins is studied. PP and SEBS copolymer blends are used as examples and foamed after sorption of CO 2 at temperatures below T m . CO 2 sorption thickens the crystalline lamellae and consequently increases T m from 160 to 178 °C for both pure PP and PP/SEBS blend systems. Foams with an average cell size smaller than 250 nm retain the ultimate stress at the level of the polymer before foaming, even without the effect of CO 2 ‐induced crystallization. Including CO 2 ‐induced crystallization, the yield and the ultimate stresses of the foam can be improved by 30 and 50% over solid PP and by 22 and 40%, for solid PP/SEBS blends, respectively. magnified image

References

22