Materials science forum · 2008 · 12 citations · 0 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysGrain Structure FormationMetal MaterialsMetalsPhysical MetallurgyAlloy BondingAmbient Temperature EffectsCopper AlloysElectrical Conductivity EnhancementGrain BoundariesMetallurgical CharacterizationRoll BondingZirconium Alloys
Aging behavior and mechanical properties of ultra fine grained Cu-Cr-Zr alloy sheet produced by accumulative roll bonding (ARB) process were investigated. A Cu-0.85Cr-0.07Zr (in mass%) alloy was solution treated and then cold-rolled at ambient temperature in the sheet of 1 mm thick. The sheets were heavily deformed by ARB process at ambient temperature up to 5 cycles. The grain size was reduced down to 210 nm and the fraction of high angle grain boundaries (HAGB’s) in the specimen after ARB process was 63%. The proof stress ( σ 0.2) and elongation were 540 MPa and 10%, respectively. Due to the aging treatment, a little grain growth took place (240 nm) and the fraction of HAGB’s was increased to 67%. The proof stress and elongation of the aged one increased to 605 MPa and 15%, respectively. It was noteworthy that the electrical conductivity remarkably increased from 35% to 79%IACS by the aging treatment. It was concluded that the aging treatment after ARB process enhanced not only the mechanical properties but also the electrical conductivity in the Cu-Cr-Zr alloys.