IEEE Transactions on Electromagnetic Compatibility · 2014 · 15 citations · 7 references
EngineeringElectrical EngineeringElectric MachinesElectromagneticsMechatronicsElectric DrivesElectric MotorsElectrical MeasurementElectromagnetic CompatibilityElectromagnetic Compatibility TestingImpedance MatchingConducted SusceptibilityElectromagnetic InterferenceImpedance MeasurementImpedance Measurement For Electromagnetic CompatibilityInterference PredictionMotor ModelingOperating ConditionsPassive Network Analysis
In electromagnetic interference prediction, dc motors are usually modeled as a source and a series impedance. Previous researches only include the impedance of the armature, while neglecting the effect of the motor's rotation. This paper aims at measuring and modeling the wideband impedance of a dc motor under operating conditions. These measurements are performed by injecting a small signal, using a method based on conducted susceptibility measurement setups as described in military standards. Different setups are developed to cover a wideband, from 0 Hz up to 200 MHz. The measurements provide satisfying results for the wideband impedance of the rotating dc motor, and the setups' validation is discussed. Finally, the resulting impedance is modeled as a passive impedance network.
7
AC Impedance Measurement Techniques
Yakov L. Familiant, Keith Corzine, Jing Huang et al. · 2005 · 72 citations
Engineering, Electrical Engineering, Systems Engineering +15