1e:T4ff, Aggressively scaling the supply voltage of SRAMs greatly minimizes their active and leakage power, a dominating portion of the total power in modern ICs. Hence, energy constrained applications, where performance requirements are secondary, benefit significantly from an SRAM that offers read and write functionality at the lowest possible voltage. However, bit-cells and architectures achieving very high density conventionally fail to operate at low voltages. This paper describes a high density SRAM in 65 nm CMOS that uses an 8T bit-cell to achieve a minimum operating voltage of 350 mV. Buffered read is used to ensure read stability, and peripheral control of both the bit-cell supply voltage and the read-buffer's foot voltage enable sub- $V_{t}$ write and read without degrading the bit-cell's density. The plaguing area-offset tradeoff in modern sense-amplifiers is alleviated using redundancy, which reduces read errors by a factor of five compared to device up-sizing. At its lowest operating voltage, the entire 256 kb SRAM consumes 2.2 $\mu$W in leakage power. 1f:T415,This paper analyzes write ability for SRAM cells in deeply scaled technologies, focusing on the relationship between static and dynamic write margin metrics. Reliability has become a major concern for SRAM designs in modern technologies. Both local mismatch and scaled VDD degrade read stability and write ability. Several static approaches, including traditional SNM, BL margin, and the N-curve method, can be used to measure static write margin. However, static approaches cannot indicate the impact of dynamic dependencies on cell stability. We propose to analyze dynamic write ability by considering the write operation as a noise event that we analyze using dynamic stability criteria. We also define dynamic write ability as the critical pulse width for a write. By using this dynamic criterion, we evaluate the existing static write margin metrics at normal and scaled supply voltages and assess their limitations. The dynamic write time metric can also be used to improve the accuracy of VCCmin estimation for active VDD scaling designs.20:T5c9,

	Year	Citations

References