International Journal for Numerical and Analytical Methods in Geomechanics · 1994 · 56 citations · 13 references
EngineeringComputational EngineeringPetroleum EngineeringFinite Element AnalysisFinite Element MethodsReservoir EngineeringMultiphase Flow In ReservoirsReservoir GeomechanicsCoulomb - Mohr TheoryPorous MediaReservoir Flow SimulationReservoir ModelingStability ConditionsSubsidenceSurface SubsidenceThree-phase Flow Simulation
Abstract The surface subsidence above a compacting saturated oil reservoir is the main topic of this paper. From a literature review, it is obvious that extensive efforts have been conducted for investigating this phenomenon in various situations. Herein, a numerical model, based on the finite element method, was used for simulating three‐dimensional three‐phase fluid flow in a deforming saturated oil reservoir. The mathematical formulation describes a fully coupled governing equation system which consists of the equilibrium and continuity equations for three immiscible fluids flowing in a porous media. An elastoplastic soil model, based on a Mohr Coulomb yield surface, was utilized. The finite element method was applied to obtain simultaneous solutions to the governing equations where the displacements and the fluid pressures are the primary unknowns. The final discretized equations are solved by a direct solver using fully implicit procedures. A linear analysis was used to study the stability conditions of the present model. Finally, a series of simulations were conducted to indicate the validity and the utility of the developed model.
13