Journal of Applied Physics · 2011 · 13 citations · 17 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysAmorphous MaterialsAmorphous SolidsPlastic DeformationPlasticityStrain Rate EffectsAmorphous AlloysAmorphous Matrix FormationAmorphous MetalsDeformation BehaviorDeformation Mechanisms Under Strain RateNanocrystalline AlloysPlastic Deformation BehaviorPlastic Flow
The compressive deformation behavior of (Cu50Zr50)92Al8 BMG under the different strain rates ranging from 6.25 × 10−4s−1 to 2 × 10−2s−1 within the super-cooled liquid region was characterized, and the effect of the plastic deformation on the mechanical properties of the alloy was investigated. It was found that the plastic flow behavior was strongly dependent on the test temperature and applied strain rates. The BMG exhibited nearly Newtonian behavior below the strain rate of 5 × 10−3s−1 at 750K, but non-Newtonian at the high strain rates and low temperatures. The non-Newtonian plastic deformation promoted the formation of nano-crystalline in the amorphous matrix, which reduced the fracture strength of (Cu50Zr50)92Al8 BMG at room temperature.
17
High-strength Cu-based bulk glassy alloys in Cu–Zr–Ti and Cu–Hf–Ti ternary systems
Akira Inoue, W Zhang, T Zhang et al. · Acta Materialia · 2001 · 778 citations
Natural Sciences, Materials Engineering, Materials Science +13
Excellent glass-forming ability in simple Cu50Zr50-based alloys
Peng Yu, H. Y. Bai, Minan Tang et al. · Journal of Non-Crystalline Solids · 2005 · 204 citations
Natural Sciences, Materials Engineering, Materials Science +8