Effects of High-Frequency Peening Methods on the Surface Layers and the Fatigue Strength of Welded Details

Imke Weich, Thomas Ummenhofer

Materials and Manufacturing Processes · 2011 · 11 citations · 0 references

Concepts

Abstract

Investigations have been carried out regarding the influence of high-frequency peening methods on the fatigue strength. These methods cause plastifications at the weld toe, which change the local weld toe geometry and produce compressive residual stresses at the surface as well as surface hardening. Two different techniques, High-Frequency Impact Treatment (HiFIT) and Ultrasonic Impact Treatment (UIT), are compared. Laser measurements of the weld seam prove that both methods change the overall weld toe radii to a more uniform shape. Residual stress measurements verify the introduction of compressive residual stresses at least up to a depth of 1–1.5 mm which can reach values up to the yield strength. Further analyses show that the local effects increase the fatigue strength. Crack detection methods prove that, due to the material mechanical effects, the crack initiation and surface layer propagation phases are extended. These effects lead to a significant increase of the fatigue strength.