Journal of Applied Polymer Science · 2003 · 17 citations · 18 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsElastomeric PolymersPolymer CharacterizationPolymer MorphologyPolymer Phase BehaviorPolymer PhysicsPolymer StructureElastomer PerformancePolyurethane ElastomersPolyurethane MaterialsPolyurethane SynthesisScattering
Abstract Three series of weakly crosslinked polyurethanes based on a hydroxyterminated polybutadiene, hydroxyterminated butadiene–acrylonitrile copolymer, and hydroxyterminated ethylene–adipate–maleate–fumarate copolymer were prepared while varying the hard segment content between 1.72 and 2.36 mol NHCOO/1000 g polymer. Information on the microphase structure and the properties of the synthesized polyurethanes was obtained by differential scanning calorimetry, wide‐angle X‐ray scattering, and mechanical studies. Up to a urethane concentration of around 2 mol NHCOO/1000 g polymer, there is a mixture of hard–hard and hard–soft segments. Above this concentration a large part of the hard–soft segments passes into hard–hard crystallites, liberating the soft segments. The best mechanical properties of the studied polyurethanes were found for a urethane concentration of around 2 mol NHCOO/1000 g polymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1858–1867, 2003
18