ACS Applied Materials & Interfaces · 2012 · 51 citations · 29 references
Natural SciencesMaterials EngineeringMaterials ScienceNanomaterialsOptical MaterialsThin FilmsCoatingsOptical Thin FilmsPolymer Thin FilmsQuantum DotsThin Film Optical PropertiesThin-film MaterialsBilayer ThicknessContact Angle MeasurementsEllipsometryMultilayer Polymer FilmsOptical CoatingsSurface Roughness EvolutionThin Film Surface CharacterizationThin-film Optical Characterization
Thin UV-blocking films of poly(methyl methacrylate) (PMMA) and ZnO quantum dots (QDs) were built-up by spin-coating. Ellipsometry reveals average thicknesses of 9.5 and 8.6 nm per bilayer before and after heating at 100 °C for one hour, respectively. The surface roughness measured by Atomic force microscopy (AFM) was 3.6 and 8.4 nm for the one and ten bilayer films, respectively. The linear increase in thickness as well as the low surface roughness increment per bilayer indicates a stratified multilayer structure and a smooth interface without aggregation. The absorption of UV radiation increased with increasing number of bilayers. At the same time, transmission was damped at wavelengths shorter than 375 nm. The thin films had a high and constant transparency in the visible region. Green-light emitting QDs could be detected by confocal microscopy at a concentration of 20% in a single layer of PMMA/ZnO. PMMA/ZnO QDs thin films are hydrophobic, as indicated by contact angle measurements.
29
Semiconductor Nanocrystals as Fluorescent Biological Labels
Marcel P. Bruchez, Mario M. Moronne, Peter Gin et al. · Science · 1998 · 8.6K citations
Ultra-large-scale syntheses of monodisperse nanocrystals
Jongnam Park, Kwangjin An, Yosun Hwang et al. · Nature Materials · 2004 · 4K citations