Materials · 2010 · 38 citations · 8 references
EngineeringMaterials EngineeringMaterials ScienceCombustionHeat TransferMaterials ProcessingCeramic ProcessingCombustion KineticsIgnitionPowder ProcessingCombustion SynthesisIgnition In Porous MediaIgnition TemperaturePore MorphologyPrecursor MaterialsSelf-propagating High-temperature SynthesisThermal ConductivityThermal Conductivity Effects
Porous titanium carbide (TiC) and TiC/Ti composites were synthesized by self-propagating high-temperature synthesis (SHS). Titanium and carbon powders were blended by various Ti/C blending ratios. The heat of reaction between titanium and carbon was high enough to induce the self-sustaining reaction of TiC formation on condition that some processing parameters (Ti/C ratio and porosity of the precursor) were appropriately selected. When the Ti/C blending ratio was high, the excess amount of titanium absorbed the heat of reaction. Consequently, the heated zone was not heated up to the ignition temperature. On the other hand, when the Ti/C ratio was low, high thermal conductivity of the precursor prevented an ignition of the heated side of precursors. The pore morphology was controlled by changing the Ti/C ratio and the preheat temperature.
8
Processing of biocompatible porous Ti and Mg
Cuié Wen, Mamoru Mabuchi, Yasuo Yamada et al. · Scripta Materialia · 2001 · 666 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +12