Applied Physics Letters · 1987 · 99 citations · 4 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsCondensed Matter PhysicsHigh-temperature MaterialsSinteringSuperconducting MaterialsCuprate SuperconductorsHigh-temperature SuperconductivityHigh-temperature SuperconductorsSpinningSuperconducting CeramicsSuperconducting PropertiesSuperconducting Wires
Fabrication of high Tc ceramic superconductors by an oxide melting method in place of a conventional sintering method has been attempted. Using three different processes, i.e., melt drawing, melt spinning, or preform-wire melting, it is demonstrated that the Ba2YCu3O7−δ type superconductors can successfully be fabricated into a desired geometry such as wire and ribbon. Tc’s for R=0 were about 92 K. The density of the melt-processed compound was measured to be as high as 6.2 g/cm3, or ∼98% of the theoretical density 6.3 g/cm3 as compared to the value of 80–85% density for sintered samples. The increased density is likely to be responsible for the noted improvements in fracture resistance and in the Jc value of the melt-processed compound.
4
High <i>T</i> <i>C</i> superconductors—composite wire fabrication
Sen Jin, R. C. Sherwood, R. B. van Dover et al. · Applied Physics Letters · 1987 · 184 citations
Natural Sciences, Materials Engineering, Materials Science +17