CORROSION · 1968 · 34 citations · 1 references
Natural SciencesMaterials EngineeringMaterials ScienceCorrosion ScienceMetallic MaterialsMetallurgyAlloysCorrosion MechanismsFracture MechanicsIntergranular CorrosionMetalsStress Corrosion CrackingAluminum AlloysCathodic PolarizationCorrosion BehaviorCrack PropagationIntergranular Corrosion In Titanium AlloysIntergranular Stress Corrosion CrackingTitanium AlloysTransgranular Stress Corrosion Cracking
Studies have been made of the corrosion characteristics and susceptibility to stress-corrosion cracking of pure titanium and Ti-Al binary alloys in methanol-iodine solutions. The results indicate that two distinct stress-corrosion mechanisms may be operative, depending on the composition of the solid. In pure titanium and a Ti-2.09 w/o Al alloy failures were found to be intergranular, while in the higher alloys (>5 w/o Al) only the initial part of the crack was intergranular, the part adjacent to the final ductile fracture being largely transgranular. In all the materials examined, the intergranular stress-corrosion process could be inhibited by cathodic polarization or the introduction of water in the methanol-iodine solution. On the basis of these and other observations, it is suggested that this process represents stress-accelerated intergranular corrosion involving dissolution of metal at a crack tip. The transgranular crack propagation stage observed in the higher alloys has the characteristics of mechanical failure, and its occurrence appears to be related to a reduced propensity for cross-slip.
1